QW and WQ type 100m3/h submersible pumps are a new generation of pump products successfully developed on the basis of the introduction of foreign advanced technology and combined with the use characteristics of domestic pumps. control features. It has a unique effect in discharging solid particles and long-fiber waste.
This series of pumps adopts a unique impeller structure and a new type of mechanical seal, which can effectively convey solids and long fibers. Compared with the traditional impeller, the impeller of the pump adopts the form of single flow channel or double flow channel. It is similar to a curved pipe with the same cross-section and has very good flow capacity. With a reasonable volute chamber, the pump has high efficiency. The high and the impeller have been tested for dynamic and static balance, so that the pump has no vibration during operation.
100m3/h sewage submersible pump features:
(1) The 100m3/h sewage submersible pump can run continuously for more than 8000 hours. The double end face series seal used in this product is made of hard corrosion-resistant tungsten carbide, which is a high-quality material with wear resistance and corrosion resistance.
(2) The signal sent by the oil-water probe is the real-time protection for the pump. When the mechanical seal on the pump side is damaged, the water in the oil-water probe enters the pump oil chamber immediately, causing the probe to send out a danger signal.
(3) The user can be equipped with a fully automatic safety protection control cabinet to keep the pump in a safe monitoring state to monitor its overload, over-temperature, water leakage or electricity leakage.
(4) The float switch replaces the special person to supervise the stop and start of the pump. The float switch in the pump can automatically control the stop and start of the pump according to the required water level change.
(5) The user can be equipped with a water jacket type internal circulation cold motion system, so that the pump can run stably in a dry or anhydrous environment.
(6) The special design improves its fouling capacity. It adopts large flow channel anti-clogging hydraulic components, which can smoothly discharge solid particles with a diameter of about 50% of the pump diameter and fibrous substances with a diameter of 5 times the pump diameter.
(7) The use of supporting motors has better energy saving and higher efficiency. And within its lift range, the motor will not be overloaded.
(8) The use of the double-rail automatic coupling installation system prevents people from directly entering and leaving the sump and makes the installation and maintenance of the pump more convenient. And the installation method can be divided into two types according to the specific situation, namely fixed automatic coupling installation and mobile free installation. By default, the QW submersible pump is not equipped with an autocoupling device.
(9) Save engineering costs. The advantages of no need to build a pump house, simple installation, convenient movement, small size, and operation when entering water make the engineering cost reduced.
Post time: 2022-01-08
