Brief introduction of 100m3/h 7.5kw 15m head (100qw100-15-7.5) submersible pump:
The 100qw100-15-7.5 submersible pump has the characteristics of remarkable energy saving effect, anti-winding, no clogging, automatic installation and automatic control, and has a unique effect in discharging solid particles and long fiber waste. The hydraulic performance of this series of sewage pumps is advanced and mature. The products have been tested by performance, and all indicators meet the relevant design requirements.
100m3/h 7.5kw 15m head (100qw100-15-7.5) submersible pump Details:
QW submersible sewage pump: It is a pump product that is connected with the motor and submerged into the liquid at the same time. Compared with the general horizontal pump or vertical sewage pump, the submersible sewage pump has obvious advantages in the following aspects:
1. Compact structure and small footprint. Since the submersible sewage pump works submerged in the liquid, it can be directly installed in the sewage pool, and there is no need to build a special pump room to install the pump and the machine, which can save a lot of land and infrastructure costs.
2. Easy to install and maintain. Small submersible sewage pumps can be installed freely, and large submersible sewage pumps are generally equipped with automatic coupling devices for automatic installation, which is very convenient for installation and maintenance.
3. Long continuous operation time. Because the pump and the motor are coaxial, the shaft of the submersible sewage pump is short, and the rotating parts are light in weight, so the load (radial) on the bearing is relatively small, and the service life is much longer than that of the general pump.
4. There are no problems such as cavitation damage and irrigation and water diversion. Especially the latter point brings great convenience to the operator.
5. Small vibration and noise, low temperature rise of the motor, and no pollution to the environment. valve inlet pump
100m3/h 7.5kw 15m head (100qw100-15-7.5) submersible pump Features:
1. The unique single-piece or double-piece impeller structure greatly improves the dirt passing capacity, and can effectively pass through the fibrous material five times the diameter of the pump and the solid particles with a diameter of about 50% of the pump diameter.
2. The mechanical seal adopts new hard and corrosion-resistant titanium tungsten material, which can make the pump run safely and continuously for more than 8000 hours.
3. The overall structure is compact, the volume is small, the noise is low, the energy saving effect is remarkable, the maintenance is convenient, there is no need to build a pump room, and it can work by diving into the water, which greatly reduces the project cost.
4. A high-precision anti-interference water leakage detection sensor is installed in the sealed oil chamber of the submersible pump, and a thermal element is embedded in the stator winding to automatically protect the pump motor.
5. It can be equipped with a fully automatic control cabinet according to the needs of users, which can automatically protect the pump from water leakage, electricity leakage, overload and over-temperature, etc., which improves the safety and reliability of the product.
6. The float switch can automatically control the start and stop of the pump according to the required liquid level change, without the need for special personnel, and it is extremely convenient to use.
7. The WQ series can be equipped with a dual-rail automatic coupling installation system according to user needs, which brings greater convenience to installation and maintenance, and people do not need to enter the sump for this purpose.
8. It can be used in the full lift without overloading the motor.
9. There are two different installation methods, fixed automatic coupling installation system, free installation.
100m3/h 7.5kw 15m head (100qw100-15-7.5) submersible pump installation method:
A. Fixed automatic installation
The automatic coupling device system is suitable for long-term fixed use occasions, and has the advantages of fast installation, convenient detection and maintenance, etc. The system uses a special base, which is fixed at the bottom of the sump and connected with the outlet pipe. A supporting block is installed on the top of the pool, and the two are connected by a guide rod. The pump is connected with a specific bracket and slides down along the guide rod to reach The base, which is automatically coupled, sealed, and automatically falls off when lifted.
B. Mobile Mounting System
The mobile installation is supported by a bracket, and it can work after connecting the water outlet hose. This method is mainly used for emergency or maintenance construction needs.
Post time: 2022-01-08
