650HW-10 Mixed Flow Pump Flow 4500 M3/Hr At 14 M Suction/Discharge 26 Inch Data:
Type: 650HW-10
Power(KW): 180KW
Speed(rpm): 590
Flow(m3/h): 4500m3/h
Head(m): 14
Outlet size: 26inch
Inlet size: 26inch
Shaft power: 177.3 kw
Efficiency: 88%
Voltage: 3 phase 380V
Frenquency: 50HZ
Pump case: Cast iron
Shaft: 3Cr13
Impeller: Cast iron
Seal type: Gland packing
Suction Casing: Cast iron
Delivery Casing: Cast iron
Weight: 1950kg
180KW 4500 M3/Hr 26 Inch 650HW-10 Mixed Flow Pump Introduction
180KW 4500 M3/Hr 26 Inch 650HW-10 Mixed Flow Pump, Simple structure, reliable use, easy installation, high efficiency, small body, light weight. Direct and variable actuations. The common movers are motor and diesel engine. Please note the model (power, rotating speed) of the mover so as to make sure of the norms of the clutch or the belt pulley. Viewing from the pump inlet, the impeller rotates counterclockwise generally (clockwise with 650HW-5, -7, -10 pump).
Structual diagram of model 400~800HW pump
(the water-out direction of model 650HW-5, -7, -10 is reversed to that shown in the figure-viewing from the pump’s inlet, the impeller moves clockwise)
1 Bearing stand
2 Bearing end cover
3 shaft
4 Muff
5 End cover
6 Thread cork
7 impeller
8 pump casing
9 Screw
10 Pump cover
11 Retaining sleeve
12 Clutch
13 Muff
14 Impeller nut gasket
15 Impeller nut
16 Paper pad
17 Packing gland
18 Packing ring
19 Paking
If you want to know more about the 180KW 4500 M3/Hr 26 Inch 650HW-10 Mixed Flow Pump, please send E-mail to marketing@apkpump.com
Post time: 2022-02-15
