D, DG Type Multi-stage Pump Structure

D, DG type multi-stage pump structure diagram (product overview)

D, DG pump is a horizontal single-suction multi-stage segmented centrifugal pump. This series of pumps has the characteristics of high efficiency, wide performance range, safe and stable operation, low noise, long life, and convenient installation and maintenance. The product implements the standard of JB/T1051-93 “Multi-stage clean water centrifugal pump type and basic parameters”. For transporting clean water or other liquids with physical and chemical properties similar to water. It can also be used to transport hot water, oil, corrosive or abrasive media by changing the material and sealing form of the pump’s flow-through components and adding a cooling system.

D, DG type multi-stage pump structure diagram (product features)

1. High efficiency, convenient installation and maintenance: the use of high-efficiency and energy-saving hydraulic models. This series of pumps has the characteristics of high efficiency, wide performance range, safe and stable operation, low noise, long life, and convenient installation and maintenance.

2. Shaft seal: It adopts soft packing seal or mechanical seal, the seal is safe and reliable, the structure is simple, and the maintenance is convenient and quick.

3. The whole machine has a long service life: the shaft is a fully enclosed structure to ensure that it does not contact the medium, does not rust, and has a long service life

Post time: 2021-11-30

Previous: ISW Horizontal Centrifugal Pump Structure

Next: Horizontal Centrifugal Pump Structure Diagram

Tags:

Write your message here and send it to us

180KW 4500 M3/Hr 26 Inch 650HW-10 Mixed Flow Pump

650HW-10 Mixed Flow Pump Flow 4500 M3/Hr At 14 M Suction/Discharge 26 Inch Data: Type: 650HW-10 Power(KW): 180KW Speed(rpm): 590 Flow(m3/h): 4500m3/h Head(m): 14 Outlet size: 26inch Inlet size: 26inch Shaft power: 177.3 kw Efficiency: 88% Voltage: 3 phase 380V Frenquency: 50HZ Pump case: Cast iron Shaft: 3Cr13 Impeller: Cast iron Seal type: Gland packing …

See more products >
75KW 1500 M3/Hr 16 Inch 400HW-7 Mixed Flow Pump

400HW-7 Mixed Flow Pump Flow 1500 M3/Hr At 14 M Suction/Discharge 16 Inch Data: Type: 400HW-7 Power(KW): 75KW Speed(rpm): 980 Flow(m3/h): 1500m3/h Head(m): 14 Outlet size: 16inch Inlet size: 16inch Shaft power: 66.3 kw Efficiency: 84% Voltage: 3 phase 380V Frenquency: 50HZ Pump case: Cast iron Shaft: 3Cr13 Impeller: Cast iron Seal type: Gland packing …

See more products >
37KW 1000 M3/Hr 12 Inch 300HW-8 Mixed Flow Pump

300HW-12 Mixed Flow Pump Flow 1000 M3/Hr At 12 M Suction/Discharge 12 Inch Data: Type: 300HW-8 Power(KW): 37KW Speed(rpm): 970 Flow(m3/h): 1000m3/h Head(m): 12 Outlet size: 12inch Inlet size: 12inch Shaft power: 31.72 kw Efficiency: 85% Voltage: 3 phase 380V Frenquency: 50HZ Pump case: Cast iron Shaft: 3Cr13 Impeller: Cast iron Seal type: Gland packing …

See more products >
355KW Horizontal Centrifugal Pump Used In Sewage Of Dry-dock

355kw horizontal centrifugal pump used in sewage of dry-dock data fluid: salt water motor: 380 v – 50 hz flow: 4379 m3/h, max. manometric height: 25 m suction height: 5/7 m body material: cast iron impeller material: stainless steel 316 place of work: sewage of dry-dock We offer for centrifugal pumps and submersible pump for …

See more products >
30KW 40HP 160M3/H Pump For Construction Of Sewage Station

Construction Of Sewage Station A sewage system is made up of a network of pipes that carry sewage from home and businesses to the main sewers. Ordinarily, the network of pipes relies on gravity for the waste to flow into the main sewer. However, in low-lying areas where the main sewer sits on higher ground …

See more products >
160KW 220HP 20M3/H Multistage Centrifugal Pump

160KW 220HP 20M3/H Multistage Centrifugal Pump Introduction The 160 KW 220HP Horizontal Multistage Water Pump is horizontal multistage centrifugal pump. This Electric Multistage Pump has developed successfully based on introduction, digestion and absorption of advanced technologies. The products not only possesses the high efficiency, good cavitation performance but also operates smoothly and reliably. Flow passage …

See more products >
15KW Single Stage Single Suction Centrifugal Pump

15KW Single Stage Single Suction Centrifugal Pump Introduction Single stage single suction centrifugal pump suitable for pumping clean water or liquids which chemical and physical property is similar to water. So single suction centrifugal pump is widely used in water transport, water supply and distribution, irrigation, drainage and flood control, district cooling/heating and fire fighting. …

See more products >
37KW 50HP 72 M3/H Vertical Pump

37KW 50HP 72 M3/H Vertical Pump Introduction The 37kw vertical multistage centrifugal pump is made up of a motor and a pump. The pump shaft and the motor shaft are coupled by a shell-type coupling to ensure that the pump and the motor are absolutely coaxial, so that the pump runs smoothly and the noise …

See more products >
22KW 30HP 90M3/H 60M Head Deep Well Submersible Pump

22KW 30HP Submersible borehole pump, suitable for pumping clean water. This pump carries drinking water approval. The pump is fitted with a 22 kW motor with sand shield, mechanical shaft seal, water-lubricated journal bearings and a volume compensating diaphragm. The motor is a canned type submersible motor offering good mechanical stability and high efficiency. Suitable …

See more products >
90KW 120HP 100M3/H Stainless Steel Material Submersible Pump

Since its foundation in 1980s in China, Shenlong has been engaged in the manufacture, supply and sales of pumps and related equipment, with submersible pumps being key products. As well as producing general drainage pumps, Shenlong puts great effort into applications for difficult-to-handle liquids, such as corrosive and high temperature liquids and seawater. 90kw 100m3/hr …

See more products >