Emergency drainage submersible pump

Application of submersible electric pump in emergency drainage

Using water pumps to quickly drain water from low-lying and flood-prone areas is one of the effective measures to reduce waterlogging after the flood. In recent years, the use of submersible electric pumps to relieve sudden flood disasters in extraordinary periods is receiving special attention from all walks of life. It is understood. Japan has developed a complete set of mobile special emergency drainage submersible pumps for the main purpose of eliminating waterlogging in smaller rivers. What followed was the emergence of emergency drainage, and technical standards for emergency drainage pump equipment were also compiled.

Emergency drainage submersible pump

1. Features of emergency drainage

The so-called emergency drainage refers to the emergency drainage task that comes in an emergency. Such as: flash floods are critical to the safety of mines and foundation pits, to stabilize the soil and prevent landslides and other emergency drainage when accidents occur; when typhoons and rainstorms strike, to protect low-lying flood-prone areas from waterlogging disasters and so on. Compared with general drainage tasks, the characteristics of emergency drainage are:

(1) The task is urgent Emergency drainage is always accompanied by sudden disasters, and it is often impossible to make preparations in advance. At the same time, if the emergency drainage measures are not implemented well, the consequences will be unimaginable. Therefore, “emergency drainage” is also called “emergency drainage”.

(2) The standard is high. The design standard of general drainage pumping station is designed to drain to the depth of the crop tolerant of flooding in 1 to 3 days of heavy rain per day, while emergency drainage usually requires the flooding and accumulation of water caused by excessive heavy rain to be exhausted. It may be eliminated in a short period of time, far exceeding the design standards of general drainage pumping stations

(3) When sudden disasters such as severe typhoons and rainstorms come, power outages are accompanied by violent storms, which invisibly aggravates the difficulty of rushing to discharge at night, and often requires emergency drainage to adapt to an unpowered power supply. 2. Bad working conditions with ignorant lighting conditions and wind and rain.

2. Application of submersible electric pump in emergency drainage

In order to meet the needs of emergency drainage, it is necessary to develop a complete set of equipment with the following conditions.

(1) Movable and use movable devices, so that when necessary, multiple standby water pump units can be used to centrally solve the urgent and high-standard emergency drainage tasks; or the emergency water special equipment should be kept in a centralized manner, and the emergency drainage equipment management center or emergency The drainage base can be called at any time as needed.

(2) Ease of loading and unloading The pump unit requires compact structure, easy operation, reliable work, and requires small size, light weight, simple and convenient removal and loading and unloading.

(3) Strong versatility Water pump units require strong versatility. The installation dimensions of products produced by any manufacturer are the same, and the parts and components should be interchangeable at will, so as to shorten the installation time on site and facilitate equipment matching and maintenance management.

The main features of this equipment are as follows:

(1) Flexible and fast response speed. Go where you need it, and change from passive waiting to active attack, which is convenient for coping with emergencies in flood fighting and disaster relief;

(2) Strong adaptability, no need to support any hydraulic structures, the outlet pipe is a hose, the site can be selected at will, and it can work normally in places without power;

(3) Project investment province. Because of the cancellation of complex hydraulic structures, the project cost has been greatly reduced;

(4) Easy to manage. Mobile irrigation and drainage trucks can be managed centrally, which completely changes the situation that the original irrigation and drainage equipment is placed in the wilderness and is easily damaged by man-made and natural factors, which is conducive to the improvement of the management level of small and medium-sized electromechanical irrigation and drainage equipment.

(5) High utilization rate of equipment The equipment can be used for emergency drainage and irrigation. When there is no irrigation and no drainage tasks, the lifting equipment can also be used for technical transformation of pumping stations, construction drainage of large projects, etc.


Post time: 2021-12-13
  • Previous:
  • Next:
  • Tags:

  • Write your message here and send it to us
    Related Posts
    • 180KW 4500 M3/Hr 26 Inch 650HW-10 Mixed Flow Pump
      180KW 4500 M3/Hr 26 Inch 650HW-10 Mixed Flow Pump

      650HW-10 Mixed Flow Pump Flow 4500 M3/Hr At 14 M Suction/Discharge 26 Inch Data: Type: 650HW-10 Power(KW): 180KW Speed(rpm): 590 Flow(m3/h): 4500m3/h Head(m): 14 Outlet size: 26inch Inlet size: 26inch Shaft power: 177.3 kw Efficiency: 88% Voltage: 3 phase 380V Frenquency: 50HZ Pump case: Cast iron Shaft: 3Cr13 Impeller: Cast iron Seal type: Gland packing …

    • 75KW 1500 M3/Hr 16 Inch 400HW-7 Mixed Flow Pump
      75KW 1500 M3/Hr 16 Inch 400HW-7 Mixed Flow Pump

      400HW-7 Mixed Flow Pump Flow 1500 M3/Hr At 14 M Suction/Discharge 16 Inch Data: Type: 400HW-7 Power(KW): 75KW Speed(rpm): 980 Flow(m3/h): 1500m3/h Head(m): 14 Outlet size: 16inch Inlet size: 16inch Shaft power: 66.3 kw Efficiency: 84% Voltage: 3 phase 380V Frenquency: 50HZ Pump case: Cast iron Shaft: 3Cr13 Impeller: Cast iron Seal type: Gland packing …

    • 37KW 1000 M3/Hr 12 Inch 300HW-8 Mixed Flow Pump
      37KW 1000 M3/Hr 12 Inch 300HW-8 Mixed Flow Pump

      300HW-12 Mixed Flow Pump Flow 1000 M3/Hr At 12 M Suction/Discharge 12 Inch Data: Type: 300HW-8 Power(KW): 37KW Speed(rpm): 970 Flow(m3/h): 1000m3/h Head(m): 12 Outlet size: 12inch Inlet size: 12inch Shaft power: 31.72 kw Efficiency: 85% Voltage: 3 phase 380V Frenquency: 50HZ Pump case: Cast iron Shaft: 3Cr13 Impeller: Cast iron Seal type: Gland packing …

    • 355KW Horizontal Centrifugal Pump Used In Sewage Of Dry-dock
      355KW Horizontal Centrifugal Pump Used In Sewage Of Dry-dock

      355kw horizontal centrifugal pump used in sewage of dry-dock data fluid: salt water motor: 380 v – 50 hz flow: 4379 m3/h, max. manometric height: 25 m suction height: 5/7 m body material: cast iron impeller material: stainless steel 316 place of work: sewage of dry-dock We offer for centrifugal pumps and submersible pump for …

    • 30KW 40HP 160M3/H Pump For Construction Of Sewage Station
      30KW 40HP 160M3/H Pump For Construction Of Sewage Station

      Construction Of Sewage Station A sewage system is made up of a network of pipes that carry sewage from home and businesses to the main sewers. Ordinarily, the network of pipes relies on gravity for the waste to flow into the main sewer. However, in low-lying areas where the main sewer sits on higher ground …

    • 160KW 220HP 20M3/H Multistage Centrifugal Pump
      160KW 220HP 20M3/H Multistage Centrifugal Pump

      160KW 220HP 20M3/H Multistage Centrifugal Pump Introduction The 160 KW 220HP Horizontal Multistage Water Pump is horizontal multistage centrifugal pump. This Electric Multistage Pump has developed successfully based on introduction, digestion and absorption of advanced technologies. The products not only possesses the high efficiency, good cavitation performance but also operates smoothly and reliably. Flow passage …

    • 15KW Single Stage Single Suction Centrifugal Pump
      15KW Single Stage Single Suction Centrifugal Pump

      15KW Single Stage Single Suction Centrifugal Pump Introduction Single stage single suction centrifugal pump suitable for pumping clean water or liquids which chemical and physical property is similar to water. So single suction centrifugal pump is widely used in water transport, water supply and distribution, irrigation, drainage and flood control, district cooling/heating and fire fighting. …

    • 37KW 50HP 72 M3/H Vertical Pump
      37KW 50HP 72 M3/H Vertical Pump

      37KW 50HP 72 M3/H Vertical Pump Introduction The 37kw vertical multistage centrifugal pump is made up of a motor and a pump. The pump shaft and the motor shaft are coupled by a shell-type coupling to ensure that the pump and the motor are absolutely coaxial, so that the pump runs smoothly and the noise …

    • 22KW 30HP 90M3/H 60M Head Deep Well Submersible Pump
      22KW 30HP 90M3/H 60M Head Deep Well Submersible Pump

      22KW 30HP Submersible borehole pump, suitable for pumping clean water. This pump carries drinking water approval. The pump is fitted with a 22 kW motor with sand shield, mechanical shaft seal, water-lubricated journal bearings and a volume compensating diaphragm. The motor is a canned type submersible motor offering good mechanical stability and high efficiency. Suitable …

    • 90KW 120HP 100M3/H Stainless Steel Material Submersible Pump
      90KW 120HP 100M3/H Stainless Steel Material Submersible Pump

      Since its foundation in 1980s in China, Shenlong has been engaged in the manufacture, supply and sales of pumps and related equipment, with submersible pumps being key products. As well as producing general drainage pumps, Shenlong puts great effort into applications for difficult-to-handle liquids, such as corrosive and high temperature liquids and seawater. 90kw 100m3/hr …