Hot water pump manufacturer

Hot water pump manufacturer

The hot water pump is an essential equipment for extracting geothermal water, and can also be used for pools, water tanks, and pressurized use. Specifically, it can be used for underground water intake in hotel hot springs, district heating, etc. Industrial pump hot water pump-R type hot water circulating pump is a single-stage single-suction and two-stage single-suction cantilever centrifugal pump, suitable for metallurgy, power station, chemical industry and other departments, used to transport high-pressure hot water below 250 ℃ without solid particles use. The maximum temperature of the hot water being transported is 250℃, and the maximum inlet pressure of the pump is 5MPa.

Hot water pump manufacturer

Best hot water pump manufacturers product classification

1. Overview of DLR vertical hot water pipeline pump:

DLR pumps are vertical, single-suction, multi-stage, segmented centrifugal pumps, suitable for urban water supply and central heating systems. It is used to transport clean water or liquids whose physical and chemical properties are similar to clean water. The temperature of the medium conveyed by the DL type pump is below 80°C, and the temperature of the medium conveyed by the DLR type pump is below 150°C.

2. Overview of IR type hot water pump:

IR type hot water pump is a single-stage single-suction cantilever centrifugal pump, suitable for heating, hot water, air-conditioning systems in various buildings and industrial sectors such as metallurgy, rubber, printing and dyeing, and sugar making. It is used to transport the medium whose temperature is not higher than 180℃ and the inlet pressure is not higher than 0.8MPa.

3. Overview of R-type hot water circulating pump:

R-type hot water circulating pump is a single-stage single-suction and two-stage single-suction cantilever centrifugal pump, suitable for metallurgy, power station, chemical industry and other departments, used to transport high-pressure hot water below 250 ℃ without solid particles. The maximum temperature of the hot water being transported is 250℃, and the maximum inlet pressure of the pump is 5MPa; when the temperature of the hot water is not higher than 250℃, the inlet pressure of the pump should not be greater than 3MPa.

4. Overview of IRG type hot water circulating pump:

IRG type hot water circulation pump is a single-stage single-suction cantilever centrifugal pump, which is suitable for hot water circulation and organic thermal power seizure in metallurgy, power station, chemical industry, heating waste heat utilization system or closed bribery. It is used to transport the medium whose temperature is not higher than 230℃ and the working pressure is not higher than 3MPa.

Post time: 2022-01-08
  • Previous:
  • Next:
  • Tags:
    • Write your message here and send it to us
    Related Posts
    • 180KW 4500 M3/Hr 26 Inch 650HW-10 Mixed Flow Pump
      180KW 4500 M3/Hr 26 Inch 650HW-10 Mixed Flow Pump

      650HW-10 Mixed Flow Pump Flow 4500 M3/Hr At 14 M Suction/Discharge 26 Inch Data: Type: 650HW-10 Power(KW): 180KW Speed(rpm): 590 Flow(m3/h): 4500m3/h Head(m): 14 Outlet size: 26inch Inlet size: 26inch Shaft power: 177.3 kw Efficiency: 88% Voltage: 3 phase 380V Frenquency: 50HZ Pump case: Cast iron Shaft: 3Cr13 Impeller: Cast iron Seal type: Gland packing …

      See more products >
    • 75KW 1500 M3/Hr 16 Inch 400HW-7 Mixed Flow Pump
      75KW 1500 M3/Hr 16 Inch 400HW-7 Mixed Flow Pump

      400HW-7 Mixed Flow Pump Flow 1500 M3/Hr At 14 M Suction/Discharge 16 Inch Data: Type: 400HW-7 Power(KW): 75KW Speed(rpm): 980 Flow(m3/h): 1500m3/h Head(m): 14 Outlet size: 16inch Inlet size: 16inch Shaft power: 66.3 kw Efficiency: 84% Voltage: 3 phase 380V Frenquency: 50HZ Pump case: Cast iron Shaft: 3Cr13 Impeller: Cast iron Seal type: Gland packing …

      See more products >
    • 37KW 1000 M3/Hr 12 Inch 300HW-8 Mixed Flow Pump
      37KW 1000 M3/Hr 12 Inch 300HW-8 Mixed Flow Pump

      300HW-12 Mixed Flow Pump Flow 1000 M3/Hr At 12 M Suction/Discharge 12 Inch Data: Type: 300HW-8 Power(KW): 37KW Speed(rpm): 970 Flow(m3/h): 1000m3/h Head(m): 12 Outlet size: 12inch Inlet size: 12inch Shaft power: 31.72 kw Efficiency: 85% Voltage: 3 phase 380V Frenquency: 50HZ Pump case: Cast iron Shaft: 3Cr13 Impeller: Cast iron Seal type: Gland packing …

      See more products >
    • 355KW Horizontal Centrifugal Pump Used In Sewage Of Dry-dock
      355KW Horizontal Centrifugal Pump Used In Sewage Of Dry-dock

      355kw horizontal centrifugal pump used in sewage of dry-dock data fluid: salt water motor: 380 v – 50 hz flow: 4379 m3/h, max. manometric height: 25 m suction height: 5/7 m body material: cast iron impeller material: stainless steel 316 place of work: sewage of dry-dock We offer for centrifugal pumps and submersible pump for …

      See more products >
    • 30KW 40HP 160M3/H Pump For Construction Of Sewage Station
      30KW 40HP 160M3/H Pump For Construction Of Sewage Station

      Construction Of Sewage Station A sewage system is made up of a network of pipes that carry sewage from home and businesses to the main sewers. Ordinarily, the network of pipes relies on gravity for the waste to flow into the main sewer. However, in low-lying areas where the main sewer sits on higher ground …

      See more products >
    • 160KW 220HP 20M3/H Multistage Centrifugal Pump
      160KW 220HP 20M3/H Multistage Centrifugal Pump

      160KW 220HP 20M3/H Multistage Centrifugal Pump Introduction The 160 KW 220HP Horizontal Multistage Water Pump is horizontal multistage centrifugal pump. This Electric Multistage Pump has developed successfully based on introduction, digestion and absorption of advanced technologies. The products not only possesses the high efficiency, good cavitation performance but also operates smoothly and reliably. Flow passage …

      See more products >
    • 15KW Single Stage Single Suction Centrifugal Pump
      15KW Single Stage Single Suction Centrifugal Pump

      15KW Single Stage Single Suction Centrifugal Pump Introduction Single stage single suction centrifugal pump suitable for pumping clean water or liquids which chemical and physical property is similar to water. So single suction centrifugal pump is widely used in water transport, water supply and distribution, irrigation, drainage and flood control, district cooling/heating and fire fighting. …

      See more products >
    • 37KW 50HP 72 M3/H Vertical Pump
      37KW 50HP 72 M3/H Vertical Pump

      37KW 50HP 72 M3/H Vertical Pump Introduction The 37kw vertical multistage centrifugal pump is made up of a motor and a pump. The pump shaft and the motor shaft are coupled by a shell-type coupling to ensure that the pump and the motor are absolutely coaxial, so that the pump runs smoothly and the noise …

      See more products >
    • 22KW 30HP 90M3/H 60M Head Deep Well Submersible Pump
      22KW 30HP 90M3/H 60M Head Deep Well Submersible Pump

      22KW 30HP Submersible borehole pump, suitable for pumping clean water. This pump carries drinking water approval. The pump is fitted with a 22 kW motor with sand shield, mechanical shaft seal, water-lubricated journal bearings and a volume compensating diaphragm. The motor is a canned type submersible motor offering good mechanical stability and high efficiency. Suitable …

      See more products >
    • 90KW 120HP 100M3/H Stainless Steel Material Submersible Pump
      90KW 120HP 100M3/H Stainless Steel Material Submersible Pump

      Since its foundation in 1980s in China, Shenlong has been engaged in the manufacture, supply and sales of pumps and related equipment, with submersible pumps being key products. As well as producing general drainage pumps, Shenlong puts great effort into applications for difficult-to-handle liquids, such as corrosive and high temperature liquids and seawater. 90kw 100m3/hr …

      See more products >
    Hit enter to search or ESC to close