Shenlong Pump Industry Co., Ltd. is a manufacturer specializing in the production of water pumps. It has more than 20 years of pump production experience. The multi-stage pumps produced by Shenlong are particularly famous. What are the main multi-stage pumps? The multi-stage pumps produced by Shenlong Pump Industry Co., Ltd. mainly include the following:
D type multistage centrifugal pump
The D-type multistage centrifugal pump is a single-stage, multi-suction, segmented centrifugal clean water pump. It is suitable for mines, factories and urban water supply and drainage. It is used to transport clean water without solid particles or liquids with physical and chemical properties similar to clean water. The temperature of the medium being transported is 0℃～80℃, and the allowable inlet pressure is 0.6MPa.
DG type sub-boiler multi-stage pump
This type of pump is a horizontal multi-stage single-suction segmental centrifugal pump. The pump casing can be disassembled axially on the axis. The suction port of the DG85-80×8 pump is vertically upward, and the discharge port is vertically upward, perpendicular to the axis line. From the perspective of the driving end, the rotation direction of the water pump is clockwise. According to the needs of users, it can also be produced in counterclockwise rotation. The user can specify it when ordering.
DG type boiler multi-stage pump
DG type boiler multi-stage pump is a single-suction, multi-stage, segmented centrifugal clean water pump, which is suitable for medium and low pressure boiler feed water, factories, and high-lift water delivery in cities. It is used to transport clean water or liquids with physical and chemical properties similar to clean water. The temperature of these two pumps is -20℃～105℃ (except for DG85-80 and 200DG43, the temperature of these two pumps is -20℃～105℃. ). The inlet pressure of the boiler multi-stage pump shall not exceed 0.59MPa (6kgf/cm2).
DG type industrial multi-stage boiler pump
DG type industrial boiler pump is a single-suction, multi-stage, segmented centrifugal clean water pump, which is suitable for medium and low pressure boiler feed water, high-lift water delivery in factories and cities. It is used to transport clean water or liquids with physical and chemical properties similar to clean water. The temperature of these two pumps is -20℃～105℃ (except for DG85-80 and 200DG43, the temperature of these two pumps is -20℃～105℃. ).
DM type mining multistage pump
DM-type mining multi-stage pump is used for conveying neutral mineral water with a solid particle content of not more than 1.5% (with a particle size of less than 0.5 mm) and other similar sewage. The temperature of the conveyed medium is not more than 80°C. It is suitable for drainage of steel plants and mines. , Sewage transportation and other occasions
DF type corrosion resistant multistage pump
DF type pump is supplied for -20℃~105℃, does not contain solid particles, corrosive liquids, the allowable pressure at the inlet of the pump is 0.6MPa
DY type multistage centrifugal oil pump
DYⅠ, DYⅡ, DYⅢ, DY, YD pumps are all single-suction multi-stage centrifugal oil pumps. It is suitable for petrochemical plants to transport petroleum and petroleum products with a viscosity of less than 120 centistokes without solid particles. Medium temperature t –20℃～150℃, allowable inlet pressure 0.6MPa.
DL, DLR vertical multistage pump
The DL pump is a vertical, single-suction, multi-stage, segmented centrifugal pump, suitable for urban water supply and central heating systems. It is used to transport clear water or liquid with physical and chemical properties similar to clear water. The temperature of the medium delivered by the DL pump is below 80°C, and the temperature of the medium delivered by the DLR pump is below 150°C.
Transport clean water or liquids with physical and chemical properties similar to clean water
DA1 multistage pump
The DA1 pump is a single-suction, multi-stage, segmented centrifugal pump, used to pump clean water and non-corrosive liquids, change the material of the flow parts, and can be used for mines to discharge acid water. The maximum temperature of the medium is 80 degrees Celsius.
DA type multistage pump
The DA pump is a single-suction multi-stage segmented centrifugal pump for pumping clean water and liquids with physical and chemical properties similar to water. The maximum temperature of the liquid should not exceed 40 ℃, which is suitable for mine drainage, factory and urban water supply.
GC type multistage pump
This is a pump that will be eliminated in the market, so this pump is only made of cast iron, and the others can be made of cast iron, cast steel, and stainless steel. I also want to mention the new ones from the Zhonglian Changsha Pump Factory. A new product, it is a new pro-product of Zoomlion Changsha Water Pump Factory in 2009. It has the advantages of high efficiency and energy saving. If you want to know more, please feel free to come to Zoomlion Changsha Pump for consultation. The new self-balancing multi-stage pump is as follows:
ZPD self-balancing multi-stage pump
It is used to transport clear water without solid particles and with a temperature below 80°C or liquids with physical and chemical properties similar to clear water. It is suitable for mines, factories and urban water supply and drainage projects.
ZPDG self-balancing boiler multi-stage pump
It is used to transport clear water without solid particles and with a temperature of -20°C~210°C or liquids with physical and chemical properties similar to clear water. Suitable for medium, low pressure and high pressure water supply.
ZPDF self-balancing corrosion-resistant multi-stage pump
It is used to transport corrosive liquids without solid particles and with a temperature of -20℃~105℃. The user can reasonably select the pump material, sealing form, pump structure, and determine the power of the motor according to the name, concentration, specific gravity, use temperature, and pump inlet pressure of the conveying medium.
ZPDY self-balancing oil pump
It is used to transport oil and petroleum products that do not contain solid particles, the temperature is -20℃~105℃, and the viscosity is less than 120 centistokes.
ZPMD type self-balancing mining multi-stage pump
Used to transport medium-sized mine influent water and other similar sewage with particle content ≤1.5%, particle size ≤1.3mm, temperature -20℃~80℃
Post time: 2021-12-13
