Thailand customer purchased 6 sets of WQ50-10-10-0.75 with auto coupling DN50
10M3/H 0.75 KW 10M Head Sewage Water Pump Data
Product name: WQ50-10-10 sewage water pump
Site: Thailand
Product No: WQ50-10-10
Rated flow: 10m3/hr
Rated head: 10m
Main power supply: 380v,50hz,3phase
Type of impeller: CLOSED
Impellor stages: single
shaft seal: Mechanical seal
Curve tolerance: ISO9906:2012 3B
Cooling Type: OIL COOLING
Pump housing: cast iron
Impeller: cast iron
shaft: 45# steel
Bearing cast iron
Motor: cast iron
Flange standard: GB
Pump inlet: FILTER
Discharge diameter: DN 50mm
Pressure stage: PN 10
Maximum submerged depth: 20 m
Inst dry/wet: SUBMERGED
Installation: VERTICAL
Pumped liquid: sewage water
Maximum liquid temperature: 40℃
Liquid temp: 38℃
Relative density: 1.157
viscosity: 3-6pas
corrosive: no
Solid content: ≤3%
Number of poles: 2
Rated power : 0.75 kW
Mains frequency: 50 Hz
Rated voltage: 380 V
Rated speed: 2900 rpm
Insulation class F
IP class: IP68
Voltage tolerance: =10/-10%
Start. method: soft start
Max starts per. hour: 20
Rated current: 2.1A
Cos phi – power factor: 0.76
Cos phi – p.f. at 3/4 load: 0.7
Cos phi – p.f. at 1/2 load: 0.59
Motor efficiency at full load: 67.00%
Motor efficiency at 3/4 load: 65.00%
Motor efficiency at 1/2 load: 64.00%
10M3/H 0.75 KW 10M Head Sewage Water Pump Introduction
WQ 0.75KW submersible sewage pumps are suitable for draining dirty water and sewage in domestic and civil applications. They come equipped with a DOUBLE-CHANNEL stainless steel impeller and are capable of pumping liquids containing short fibred suspended solids up to diam. 50 mm.They are ideal for pumping sewage water, waste water, surface water and water mixed with mud in locations such as holiday homes and detached homes.These pumps distinguish themselves for their reliability, which can be best appreciated under automatic operating conditions in fixed installations.
PDF: 10M3/H 0.75 KW 10M Head Sewage Water Pump in Thailand Technical Sheet
Post time: 2022-02-16
